Home / Buyer Guides / Private label
Private Label Kitchen Composters: OEM and ODM
Private-label small appliances fail in the details: a plug that is wrong for the market, a manual that was machine translated, a carton that says 220 V on a 120 V unit. This is the checklist we run before a private-label composter leaves the factory.
1. The customisation layers
| Layer | Options | What sets the minimum |
|---|---|---|
| Housing colour | Stock colours or Pantone-matched | Paint or moulding batch per colour |
| Logo | Pad print, label, moulded-in mark | Plate cost per colour |
| Control panel | Language, icons, brand name | Panel print run |
| Voltage / plug | 220–240 V EU/UK/AU, 120 V US/CA, plug type | Electrical variant testing per version |
| Manual | Language, layout, compliance statements | Print run per language |
| Packaging | Colour box, mailer, master carton | Carton print run — usually the real MOQ |
Voltage versions are not a printing change. Each electrical variant needs its own safety file, its own label and often its own test report. That is why a 120 V private-label run has a different minimum from a 220 V run, and why mixing both in one order is more efficient than ordering one and re-testing later.
2. The plug and voltage matrix
| Market | Voltage / frequency | Plug | Notes |
|---|---|---|---|
| EU | 220–240 V / 50 Hz | CEE 7/7 (Schuko) | CE marking; national EPR registration by importer |
| UK | 230 V / 50 Hz | BS 1363 | UKCA or CE accepted depending on scheme |
| US / Canada | 120 V / 60 Hz | NEMA 5-15 | UL or ETL listing required by most retail |
| Australia / NZ | 230–240 V / 50 Hz | AS/NZS 3112 | RCM marking |
| Japan | 100 V / 50–60 Hz | Type A | Separate variant; check heating performance at 100 V |
Costly mistake: ordering a 220 V unit with a universal plug "so it works everywhere". Universal plugs fail retail compliance in several markets, and the label on the carton must match the unit inside.
3. Certification ownership
Ask three questions before the order:
- Whose name is on the existing test report — the factory's or a previous customer's?
- If the report is not in your company name, can it be re-issued, and at what cost?
- Who pays for re-testing if the housing colour or the control board changes?
A report in another buyer's name is not automatically usable for your brand in every market. Re-issuing is usually possible and cheaper than starting again, but it must be planned into the timeline, not discovered at the port.
4. Packaging that arrives intact
- Inner protection: EPS or moulded pulp corner blocks; a composter has a glass-free but heavy body, and the control panel is the fragile end.
- Drop test: packed carton, 80 cm, six faces, on concrete. Check the panel and the bucket latch afterwards.
- Carton marking: model, voltage, serial range, gross weight, country of origin, barcode, and any market-specific recycling mark.
- Pallet pattern: agree cartons per layer and total height under 1,200 mm including the pallet.
5. Timeline and what to lock first
A private-label run typically needs: artwork and panel approval, a first-off sample for sign-off, re-issued test documentation where the model or market changes, then production. Lock in this order: voltage version → panel language → carton artwork → manual language. Changing the voltage version after the test file is opened is the most expensive change in the sequence.
Planning a private-label composter?
Tell us the market, the voltage and the languages. We will come back with the MOQ per version, the panel and carton options, the spare-parts kit and the documentation we can supply.
Ask for private-label options